Detailed introduction：

   Scope of application

○ SMGG2Z-125-3150A applies to two low-voltage circuit switching or the conversion of two load devices or security isolation.

○ Operation:

Direct operation: The handle is mounted on the switch.

Outside the cabinet operation: Handle installed in the distribution cabinet door.

○ The product can be provided with the observation window according to the requirement, and the state of the contact opening and closing can be directly observed.

○ There are three poles, four poles (three pole + neutral pole).

○ Extended shaft for out-of-cabinet operation.

○ Two auxiliary contacts can be fitted as required.

○ Electrical and mechanical properties and SMGG2-125-3150A Electrical and mechanical properties corresponding to the same

○ Can be provided with a bridge-connected conductor to connect the inlet or outlet of the switch.

Note: The choice of bridge connections, should be used for incoming or outgoing terminal.

 

SMGG2Z-125~3150A Type Conversion load - isolation switch

 

The outline and mounting dimensions of SMGG2Z-125~1600A Type Conversion load - isolation switch (mm)

 

The outline and mounting dimensions of SMGG2Z-2000~3150A Type Conversion load - isolation switch (mm)