Company

  • Company profile
  • CerttfIcates
  • News
  • Video
    • Responsive image

    SMGU1-A25 Surge Protective Device

    Detailed introduction：

    Scope of application 

    SMGU1-A25 series gap-type surge protector (a mine, a 10/350 μs waveform) according to IEC and GB standards.

    Applied to lightning risk areas of the higher power equipment, the first level surge protection system. It can be applied to single-phase, three-phase power supply lines, modularized design, standard 35mm rail-mounted installation, and installed in the main distribution cabinet (box) of the building through the combination of different quantities. Limp = 25KA, limp = 35KA, limp = 15KA, limp = 25KA, limp = 35KA), outdoor distribution cabinet (box), with high lightning current discharge capacity, no freewheeling, single module maximum inrush current (10/350 μs) Limp = 50KA The maximum discharge current (8/20 μs) can be reached Imax = 100KA, Imax = 150KA. Imax = 160 kA. Imax = 200KA.


    Model and meaning 

     

    Normal use and installation conditions
    ○ Ambient temperature is -40 ℃ - +80 ℃
    ○ Relative humidity not more than 90% (25 ℃)
    ○ Applicable grounding pump flow "IT" "TT.TS, TN-N-S"
    ○ No shock or vibration
    ○ Altitude of not more than 2000m.
    ○ Installation method with TH35mm wide guide rail.
    ○ The slope to the vertical plane does not exceed 50 °.
    ○ There is no danger of candle-fried in the medium, and the media is not enough to corrode the metal and damage the insulation of the gas and dust.


    Technical parameters 


    Appearance and installation dimensions